Fitment: 2005+ Ford F250, F350, F450, F550 Super Duty.  Can be used for 1999-2004 models for 2005+ axle retrofits.


This is designed for 5/8” shock bolts. 

It comes with the 5/8 upper shock bolts but not with the shock spacers that usually come with the shocks. 

You must request 5/8 I.D. X 1 1/2” wide shock spacers when you order your coil overs no matter who you get your coilovers from.

Shock spacers must be supplied by the shock manufacture to match the shocks.


 

Features and benefits:


-Fits stock, lifted and lowered applications.

-Utilizes the OEM shock tower fastener locations to ensure 100% correct fit. 

-Optimized shock mounting:

  >Raised shock mounting location – benefits lowered race truck applications to maintain wheel travel while using a race style shock.  So, if you want to use a bypass shock to tune your suspension, you will not sacrifice wheel travel.

  >Run up to a 3.0 bypass shock without interference.  

  >Shock fitment in the OE location 

      Multiple Bypass 2.0, 2.5 & 3.0 shocks

      Smooth body 2.0, 2.5, 3.0 & 4.0 shocks

      Piggyback 2.0, 2.5  3.0 & 4.0 shocks

      The shock mount on the shock tower in the OE location is 2 1/4 " taller from the center of the old OE pin top mount to the new center of bolt. The stock shock is 14 inches long compressed length so if you were to put these shock towers on a stock truck you would need a shock that was 16 inches long compressed length.

  >Designed to mount remote reservoirs - You can proudly display your reservoirs using specially designed One Up Offroad billet clamps on the AST.

-Modularity – the AST will grow with your increasing needs.

  >Start with OEM style spring and upgrade to a coilover shock without changing the shock tower.  Simply change the upper coil spring mounts to the coilover shock mounts.

  >Works with ALL BRANDS of coilover shocks.

  >Coilover shock mounts have 4 offset mounting options to optimize reservoir mounting, hose routing and shock location position.

  >Matching One Up Offroad Lower Coilover Shock Mounts are available.

-Mounts factory engine compartment components.

-All components are powder coated or zinc treated to exceed OEM standards for corrosion resistance.

-CAD designed and cycled with OEM chassis models to ensure proper fit and clearance.

-Made with expertly welded laser cut steel, chromoly steel tube and precision CNC machined components to ensure the best quality in the industry for perfect fit and finish.

-All Grade 8 hardware and instructions included.

-The original Adaptable Shock Tower TM Upgrade invented and pioneered by One Up Offroad.

-For over 20 years we have been building the best.

-Made in the USA with pride and tested by our test team to ensure best performance.

Write a review.

Note: HTML is not translated.
    Bad           Good

One Up Offroad Adaptable Shock Towers for Coilovers (05-16 Super Duty)

Product Information

  • $594.00