Shifted Industries - Turbos & Kits

1994-2002 63mm FMW HX35 Cheetah Turbocharger. Amplify your driving experience with a Brand New No Core Charge Fleece Performance Cheetah Turbocharger. Featuring a Fleece Performance exclusive 63mm FMW compressor wheel and a high flow turbine wheel; this turbo is capable of supporting 650 RWHP, without sacrificing any drivability.

As a 100 percent drop-in replacement turbo, the Cheetah does not require any expensive kit or specialized tuning, just bolt it in and go. Enjoy smooth and quick throttle response, big top end power, and that classic Cheetah sound.

Whether it's towing, racing, sled pulling, or just driving to work the Cheetah will get the job done.

Proven Cheetah Technology:

• Drop-In Replacement
• 2.5 Inch Work Stock Legal
• Stock Like Spooling
• Fleece Performance Exclusive FMW Compressor Wheel Technology
• Max Rear Wheel HP Rating: 650HP
• 40-45 PSI Operating Range

2003-2004 63mm FMW Ford 6.0L Cheetah Turbocharger. The Ford 6.0L VNT Cheetah Turbocharger is a drop-in replacement turbocharger for 2003-2007 6.0L Ford diesels. It comes with a Fleece Performance Engineered 63mm FMW compressor wheel and high flow Cheetah turbine wheel.

This stock replacement turbo is guaranteed to enhance your driving experience.

You’ll enjoy the spool up and throttle response of a small turbo and still get the big top end power you’re looking for. Rated at 650 RWHP this is the ultimate combination for dual purpose applications.

If you are towing during the week, and sled pulling on the weekend, the 63mm FMW VNT Cheetah is just the ticket.
Stock Appearing:

• 100 Percent Stock Appearing. This turbocharger uses the stock housings with updated internals. This allows you to keep all factory systems intact yet allow you to safely run 40 PSI of boost. No aftermarket components or modifications needed for installation.

Proven Technology:

• These turbochargers are built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings.

Powerful Yet Responsive:

• These turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end.

FPE Exclusive FMW Wheel Technology:

• Forged Milled Wheels are Stronger than Billet
• Faster Spool-Up
• Increased Throttle Response
• Broader Torque Curve
• 2.5 Inch Work Stock Legal

The Ultimate Drop-In Replacement Performance Turbocharger

2003-2004 63mm FMW Ford 6.0L Cheetah Turbocharger. The Ford 6.0L VNT Cheetah Turbocharger is a drop-in replacement turbocharger for 2003-2007 6.0L Ford diesels. It comes with a Fleece Performance Engineered 63mm FMW compressor wheel and high flow Cheetah turbine wheel.

This stock replacement turbo is guaranteed to enhance your driving experience. You’ll enjoy the spool up and throttle response of a small turbo and still get the big top end power you’re looking for. Rated at 650 RWHP this is the ultimate combination for dual purpose applications. If you are towing during the week, and sled pulling on the weekend, the 63mm FMW VNT Cheetah is just the ticket.

Stock Appearing:

100 Percent Stock Appearing. This turbocharger uses the stock housings with updated internals. This allows you to keep all factory systems intact yet allow you to safely run 40 PSI of boost. No aftermarket components or modifications needed for installation.

Proven Technology:

These turbochargers are built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings.

Powerful Yet Responsive:

These turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end.

FPE Exclusive FMW Wheel Technology:

• Forged Milled Wheels are Stronger than Billet
• Faster Spool-Up
• Increased Throttle Response
• Broader Torque Curve
• 2.5 Inch Work Stock Legal
• The Ultimate Drop-In Replacement Performance Turbocharger

2003-2004 Cummins 63mm FMW Holset Cheetah Turbocharger. Amplify your driving experience with a Fleece Performance Holset Cheetah Turbocharger.

Featuring a Fleece Performance exclusive 63mm FMW compressor wheel and a high flow turbine wheel; this turbo is capable of supporting 650 RWHP, without sacrificing any drivability.

As a 100 percent drop-in replacement turbo, the Holset Cheetah does not require any expensive kit or specialized tuning, just bolt it in and go. Enjoy smooth and quick throttle response, big top end power, and that classic Cheetah sound.

Whether it's towing, racing, sled pulling, or just driving to work the Holset Cheetah will get the job done.

Proven Cheetah Technology:

• Drop-In Replacement
• 2.5 Inch Work Stock Legal
• Stock Like Spooling
• Fleece Performance Exclusive FMW Compressor Wheel Technology
• Max Rear Wheel HP Rating: 650HP
• 40-45 PSI Operating Range

2004.5-2007 63mm FMW Ford 6.0L Cheetah Turbocharger. The Ford 6.0L VNT Cheetah Turbocharger is a drop-in replacement turbocharger for 2003-2007 6.0L Ford diesels. It comes with a Fleece Performance Engineered 63mm FMW compressor wheel and high flow Cheetah turbine wheel.

This stock replacement turbo is guaranteed to enhance your driving experience. You’ll enjoy the spool up and throttle response of a small turbo and still get the big top end power you’re looking for. Rated at 650 RWHP this is the ultimate combination for dual purpose applications. If you are towing during the week, and sled pulling on the weekend, the 63mm FMW VNT Cheetah is just the ticket.

Stock Appearing:

100 Percent Stock Appearing. This turbocharger uses the stock housings with updated internals. This allows you to keep all factory systems intact yet allow you to safely run 40 PSI of boost. No aftermarket components or modifications needed for installation.

Proven Technology:

These turbochargers are built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings.

Powerful Yet Responsive:

These turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end.

FPE Exclusive FMW Wheel Technology:

• Forged Milled Wheels are Stronger than Billet
• Faster Spool-Up
• Increased Throttle Response
• Broader Torque Curve
• 2.5 Inch Work Stock Legal
• The Ultimate Drop-In Replacement Performance Turbocharger

2004.5-2007 63mm FMW Ford 6.0L Cheetah Turbocharger. The Ford 6.0L VNT Cheetah Turbocharger is a drop-in replacement turbocharger for 2003-2007 6.0L Ford diesels. It comes with a Fleece Performance Engineered 63mm FMW compressor wheel and high flow Cheetah turbine wheel.

This stock replacement turbo is guaranteed to enhance your driving experience. You’ll enjoy the spool up and throttle response of a small turbo and still get the big top end power you’re looking for. Rated at 650 RWHP this is the ultimate combination for dual purpose applications. If you are towing during the week, and sled pulling on the weekend, the 63mm FMW VNT Cheetah is just the ticket.

Stock Appearing:

100 Percent Stock Appearing. This turbocharger uses the stock housings with updated internals. This allows you to keep all factory systems intact yet allow you to safely run 40 PSI of boost. No aftermarket components or modifications needed for installation.

Proven Technology:

These turbochargers are built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings.

Powerful Yet Responsive:

These turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end.

FPE Exclusive FMW Wheel Technology:

• Forged Milled Wheels are Stronger than Billet
• Faster Spool-Up
• Increased Throttle Response
• Broader Torque Curve
• 2.5 Inch Work Stock Legal
• The Ultimate Drop-In Replacement Performance Turbocharger

2004.5-2007 Cummins 63mm FMW Holset Cheetah Turbocharger. Amplify your driving experience with a Fleece Performance Holset Cheetah Turbocharger.

Featuring a Fleece Performance exclusive 63mm FMW compressor wheel and a high flow turbine wheel; this turbo is capable of supporting 650 RWHP, without sacrificing any drivability.

As a 100 percent drop-in replacement turbo, the Holset Cheetah does not require any expensive kit or specialized tuning, just bolt it in and go. Enjoy smooth and quick throttle response, big top end power, and that classic Cheetah sound.

Whether it's towing, racing, sled pulling, or just driving to work the Holset Cheetah will get the job done.

Proven Cheetah Technology:

• Drop-In Replacement
• 2.5 Inch Work Stock Legal
• Stock Like Spooling
• Fleece Performance Exclusive FMW Compressor Wheel Technology
• Max Rear Wheel HP Rating: 650HP
• 40-45 PSI Operating Range

The Brand New No Core 68mm Billet Duramax VNT Cheetah Turbocharger is a drop-in replacement turbocharger for 04.5-10 Duramax diesels . It comes with a Fleece Performance Engineered 68mm billet compressor wheel and high flow Cheetah turbine wheel. This stock appearing replacement turbo is guaranteed to enhance your driving experience.

You'll enjoy the spool up and throttle response of a small turbo and still get the big top end power you're looking for. Rated at up to 825 RWHP this is the ultimate high performance drop in replacement turbocharger for your 2004.5-2010 Duramax. Please note, this is a high performance turbo charger designed for 650+hp.

If you have stock connecting rods and less than 100hp injectors we recommend the 63mm Billet VNT Cheetah turbocharger. Aftermarket tuning and aftermarket high flow exhaust are required for installation of this turbo.

Stock Appearing:
100 percent Stock Appearing. This turbocharger uses the stock housings with updated internals. This allows you to keep all factory systems intact yet allow you to safely run 40-45 PSI of boost.

Proven Technology:
These turbochargers are built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. No other drop in replacement aftermarket VNT turbo on the market can offer you that.

Powerful Yet Responsive:
With proper tuning and fuel these turbochargers spool extremely fast, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end.

Features:

• FPE Exclusive Billet Wheel Technology:
• Faster Spool-Up
• Increased Throttle Response
• Broader Torque Curve
• The Ultimate Drop-In Replacement Performance Turbocharger

Details:

• Fits 2004.5-2010 Duramax
• Engine Manufacturer Chevrolet
• Engine Duramax
• Engine Years 2004.5-2010
• Sold As Each
• Compressor Size 68 mm
• Pressure Rating 40-45 PSI
• Thrust Bearings 360 degree
• Variable Nozzle Technology Yes

2004.5-2010 Duramax S362 FMW Turbo Kit. The Fleece Performance S362 FMW Turbo Kit is a replacement turbocharger kit for 2004.5-2010 (LLY, LBZ, LMM) Duramax diesels. It comes with a 62mm FMW compressor wheel and high flow turbine wheel rated for 625 RWHP.

This turbocharger kit is guaranteed to enhance your driving experience. You’ll enjoy the quick spool up and throttle response of a small turbo and still get the big top end power you’re looking for. Important Notes: Aftermarket tuning and aftermarket high flow exhaust are required for installation of this turbo.

Features:

• Turbo Kit is rated for up to 625 RWHP
• Improved Throttle Response
• No additional hardware required

Kit Includes:

• Borg Warner FMW 62/68/.83 IWG T4 Turbocharger
• 4.4 Inch Stainless Steel T4 Duramax Turbo Pedestal without Wastegate
• Duramax Remote Turbo Oil Feed Line for 1/4 NPT Turbo Oil Inlet (EX: Borg Warner S300 and S400 Frame Turbos)
• 5.75 Inch long 4 Ply Silicone Hose
• (2) Breeze Mini Hose Clamp SAE 16 w/ Plated Hex Screw
• Universal Turbo Drain Nipple (7/8 Inch) with Integrated Sealing O-ring
• 2001-2010 Duramax Lower Turbo Drain Tube (LB7, LLY, LBZ, LMM)
• 12MM Metric Port Plug Allen Head (Duramax Valley Plug)
• (2) M8 x 1.25 Flange Head for Turbo Drain Kits
• (4) M10 x 12 x 5.3 x 19.7 (37) Stud
• (4) Nut for Stud Kits
• Duramax Turbo Thermostat Coolant Plug
• 3/8 Inch Billet Aluminum Universal Block Off Plug
• Breeze Mini Hose Clamp SAE 6 w/Plated Hex Screw
• Breeze V-Band 4.13 Inch w/ 400-Series SS Bolt (HX40 Clamp - VT10413)
• 3 Inch Stainless Steel Duramax Downpipe
• (2) Duramax Up-pipe Gasket (Upper)

The brand new no core charge 63mm/71mm (Race) FMW Duramax VNT Cheetah Turbocharger is a drop-in replacement turbocharger for 04.5-10 Duramax diesels. It comes with a Fleece Performance Engineered 63mm FMW compressor wheel and high flow Cheetah 71mm turbine wheel.

This drop-in replacement turbo is guaranteed to enhance your driving experience. You'll enjoy the spool up and throttle response of a small turbo and still get the big top end power you're looking for. Rated at 700 RWHP this is the ultimate combination for dual purpose applications. If you are towing during the week, and sled pulling on the weekend, the 63mm VNT Cheetah is just the ticket.

Aftermarket tuning and aftermarket high flow exhaust are required for installation of this turbo.

Stock Appearing - 100 percent Stock Appearing. This turbocharger uses the stock housings with updated internals. This allows you to keep all factory systems intact yet allow you to safely run 40-45 PSI of boost.

Proven Technology - These turbochargers are built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. No other drop in replacement aftermarket VNT turbo on the market can offer you that.

Powerful Yet Responsive - These turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end.

FPE Exclusive FMW Wheel Technology:

• Forged Milled Wheels are Stronger than Billet
• Faster Spool-Up
• Increased Throttle Response
• Broader Torque Curve
• 2.5 Inch Work Stock Legal
• The Ultimate Drop-In Replacement Performance Turbocharger

Features:

• Engine Manufacturer: Duramax
• Engine Year: 2004.5-2010
• Engine Version: LLY, LBZ, LMM
• Sold As: Each

The brand new no core charge 63mm/66mm (Street) FMW Duramax VNT Cheetah Turbocharger is a drop-in replacement turbocharger for 04.5-10 Duramax diesels. It comes with a Fleece Performance Engineered 63mm FMW compressor wheel and high flow Cheetah 66mm turbine wheel.

This drop-in replacement turbo is guaranteed to enhance your driving experience. You'll enjoy the spool up and throttle response of a small turbo and still get the big top end power you're looking for. Rated at 600 RWHP this is the ultimate combination for dual purpose applications. If you are towing during the week, and sled pulling on the weekend, the 63mm VNT Cheetah is just the ticket.

Aftermarket tuning and aftermarket high flow exhaust are required for installation of this turbo.

Stock Appearing - 100 percent Stock Appearing. This turbocharger uses the stock housings with updated internals. This allows you to keep all factory systems intact yet allow you to safely run 40-45 PSI of boost.

Proven Technology - These turbochargers are built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. No other drop in replacement aftermarket VNT turbo on the market can offer you that.

Powerful Yet Responsive - These turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end.

FPE Exclusive FMW Wheel Technology:

• Forged Milled Wheels are Stronger than Billet
• Faster Spool-Up
• Increased Throttle Response
• Broader Torque Curve
• 2.5 Inch Work Stock Legal
• The Ultimate Drop-In Replacement Performance Turbocharger

Features:

• Engine Manufacturer: Duramax
• Engine Year: 2004.5-2010
• Engine Version: LLY, LBZ, LMM
• Sold As: Each

2007.5-2012 Cummins 63mm FMW Holset VGT Cheetah Turbocharger. Amplify your driving experience with a Fleece Performance Holset VGT Cheetah Turbocharger.

Featuring a brand new actuator, a Fleece Performance exclusive 63mm FMW compressor wheel and a high flow turbine wheel; this turbo is capable of supporting 700HP, without sacrificing any drivability.

As a 100 percent drop-in replacement turbo, the Holset VGT Cheetah does not require an expensive installation kit. Enjoy lower EGT's, smooth and quick throttle response, big top end power.

Whether it's towing, racing, sled pulling, or just driving to work the Holset VGT Cheetah will get the job done. Aftermarket off road tuning and aftermarket off road free flowing exhaust are required.

Proven Cheetah Technology:

• Drop-In Replacement
• Lower EGT's
• 2.5 Inch Work Stock Legal
• Stock Like Spooling
• Fleece Performance Exclusive FMW Compressor Wheel Technology
• Max Rear Wheel HP Rating: 700HP
• 40-45 PSI Operating Range

2007.5-2017 6.7L Common Rail Cummins Only

Built from the more reliable (Garret GT37 based) Powerstroke Turbo, the Powerstroke Cheetah Turbo will give you the power and reliablility that you expect. You are probably reading this becuase your single sequential Powerstroke Turbo has either failed or is under performing.

This is very common and the reason why we use the more reliable, better performing GT37 Powerstroke Turbo platform as the basis for our Cheetah Turbo. Aftermarket off road tuning and aftermarket off road free flowing exhaust are required. Includes: Turbo, pedestal, pedestal gasket, coolant line, and oil feed lines if applicable.
Proven Cheetah Technology:

• Lower EGT's
• 2.5 inch Work Stock Legal
• Stock Like Spooling
• Fleece Performance Exclusive FMW Compressor Wheel Technology
• Max Rear Wheel HP Rating: 650HP
• 40-45 PSI Operating Range

Installation Note: In order to install this Cheetah on your 2011-2014 Powerstroke, you will need the No Limit Fabrication Retrofit Kit or similiar kit that will allow you to retrofit the 2015-2018 Powerstroke turbo to your 2011-2014 Powerstroke

Built from the more reliable (Garret GT37 based) Powerstroke Turbo, the Powerstroke Cheetah Turbo will give you the power and reliablility that you expect. You are probably reading this becuase your single sequential Powerstroke Turbo has either failed or is under performing. This is very common and the reason why we use the more reliable, better performing GT37 Powerstroke Turbo platform as the basis for our Cheetah Turbo.

Aftermarket off road tuning and aftermarket off road free flowing exhaust are required. Includes: Turbo, pedestal, pedestal gasket, coolant line, and oil feed lines if applicable.

Proven Cheetah Technology:

• Lower EGT's
• 2.5 Inch Work Stock Legal
• Stock Like Spooling
• Fleece Performance Exclusive FMW Compressor Wheel Technology
• Max Rear Wheel HP Rating: 650HP
• 40-45 PSI Operating Range

Installation Note: In order to install this Cheetah on your 2011-2016 Powerstroke, you will need the No Limit Fabrication Retrofit Kit or similiar kit that will allow you to retrofit the 2015-2018 Powerstroke turbo to your 2011-2016 Powerstroke.
Features:

• 2011-2016 63mm FWM 6.7 (Cab and Chassis)Powerstroke Cheetah Turbo
• Engine Manufacturer: Powerstroke
• Engine Year: 2011-2016
• Liter: 6.7 Liter
• Sold As: Each

2011-2016 63mm FMW Duramax VNT Cheetah Turbocharger (LML). 63mm FMW Duramax VNT Cheetah Turbocharger is a drop-in replacement turbocharger for 2011-2016 Duramax diesels. It comes with a Fleece Performance Engineered 63mm FMW compressor wheel and high flow Cheetah turbine wheel.

This drop-in replacement turbo is guaranteed to enhance your driving experience. You’ll enjoy the spool up and throttle response of a small turbo and still get the big top end power you’re looking for. Rated at 650 RWHP this is the ultimate combination for dual purpose applications.

If you are towing during the week, and sled pulling on the weekend, the 63mm VNT Cheetah is just the ticket.

Aftermarket tuning and aftermarket high flow exhaust are required for installation of this turbo.

Stock Appearing:

100 Percent Stock Appearing. This turbocharger uses the stock housings with updated internals. This allows you to keep all factory systems intact yet allow you to safely run 40-45 PSI of boost.

Proven Technology:

These turbochargers are built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. No other drop in replacement aftermarket VNT turbo on the market can offer you that.

Powerful Yet Responsive:

These turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end.

FPE Exclusive FMW Wheel Technology:

• Forged Milled Wheels are Stronger than Billet
• Faster Spool-Up
• Increased Throttle Response
• Broader Torque Curve
• 2.5 Inch Work Stock Legal
• The Ultimate Drop-In Replacement Performance Turbocharger

2011-2016 LML S362 FMW Turbo Kit. The Fleece Performance LML S362 FMW Turbo Kit is a replacement turbocharger kit for 2011-2016 LML Duramax diesels. It comes with a 62mm FMW compressor wheel and high flow turbine wheel rated for 625 RWHP.

This turbocharger kit is guaranteed to enhance your driving experience. You’ll enjoy the quick spool up and throttle response of a small turbo and still get the big top end power you’re looking for. Important Notes: Aftermarket tuning and aftermarket high flow exhaust are required for installation of this turbo.

The downpipe/exhaust interface is the 2011-2015 v-band style. 2015.5-2016 trucks will be required to use a 2011-Early 2015 exhaust system.

Features:

• Turbo Kit is rated for up to 625 RWHP
• Improved Throttle Response
• No additional hardware required

Kit Includes:

• Borg Warner FMW 62/68/.83 IWG T4 Turbocharger
• 4.4 Inch Stainless Steel T4 Duramax Turbo Pedestal without Wastegate
• Duramax Remote Turbo Oil Feed Line for 1/4 NPT Turbo Oil Inlet (EX: Borg Warner S300 and S400 Frame Turbos)
• 2011-2016 Duramax Turbo Drain Tube Kit (LML) FPE-DTDT-1116
• (2) M8 x 1.25 Flange Head
• (2) Breeze Mini Hose Clamp SAE 16 w/ Plated Hex Screw
• (4) M10 x 12 x 5.3 x 19.7 (37) Stud
• (4) Nut for Stud Kits
• T4 Divided Turbine Flange Gasket
• 16MM Metric Port Plug Allen Head
• 2011 plus Duramax LML Rear Engine Cover Coolant Return Plug FPE-LML-CP
• 1/2 Inch Billet Aluminum Universal Block Off Plug w/ hose clamps FPE-34071
• Breeze V-Band 4.13 Inch w/ 400-Series SS Bolt
• 3 Inch Stainless Steel Duramax Downpipe w/ turbo side clamp FPE-34182
• Duramax Up-pipe Gasket (Upper) (2)
• 3 Inch piece of 1/2 Inch heater hose and hose clamp

2013-2017 Cummins 63mm FMW Holset VGT Cheetah Turbocharger. Amplify your driving experience with a Fleece Performance Holset VGT Cheetah Turbocharger.

Featuring a brand new actuator, a Fleece Performance exclusive 63mm FMW compressor wheel and a high flow turbine wheel; this turbo is capable of supporting 700HP, without sacrificing any drivability.

As a 100 percent drop-in replacement turbo, the Holset VGT Cheetah does not require an expensive installation kit. Enjoy lower EGT's, smooth and quick throttle response, big top end power.

Whether it's towing, racing, sled pulling, or just driving to work the Holset VGT Cheetah will get the job done. Aftermarket off road tuning and aftermarket off road free flowing exhaust are required.

Proven Cheetah Technology:

• Drop-In Replacement
• Lower EGT's
• 2.5 Inch Work Stock Legal
• Stock Like Spooling
• Fleece Performance Exclusive FMW Compressor Wheel Technology
• Max Rear Wheel HP Rating: 700HP
• 40-45 PSI Operating Range

2007.5-2017 6.7L Common Rail Cummins Only

2015-2016 63mm FMW 6.7L Powerstroke Cheetah Turbocharger. Amplify your driving experience with a Fleece Performance Cheetah Turbocharger. Featuring a Fleece Performance exclusive 63mm FMW compressor wheel and a high flow turbine wheel; this turbo is capable of supporting 650HP, without sacrificing any drivability. Enjoy lower EGT's, smooth and quick throttle response, big top end power.

Whether it's towing, racing, sled pulling, or just driving to work the Cheetah will get the job done. Aftermarket off road tuning and aftermarket off road free flowing exhaust are required.

Proven Cheetah Technology:

• Drop-In Replacement
• Lower EGT's
• 2.5 Inch Work Stock Legal
• Stock Like Spooling
• Fleece Performance Exclusive FMW Compressor Wheel Technology
• Max Rear Wheel HP Rating: 650HP
• 40-45 PSI Operating Range

The No Limit Fabrication Retro Fit Kit is required for the 6.7L Powerstroke Cheetah Turbo to work on 2011-2014 trucks. The 6.7L Powerstroke Cheetah Turbos are based off 2015-2016 Turbochargers.

Amplify your driving experience with a Fleece Performance Cheetah Turbocharger. Featuring a Fleece Performance exclusive 63mm FMW compressor wheel and a high flow turbine wheel; this turbo is capable of supporting 650HP, without sacrificing any drivability.

Enjoy lower EGT's, smooth and quick throttle response, big top end power. Whether it's towing, racing, sled pulling, or just driving to work the Cheetah will get the job done. Aftermarket off road tuning and aftermarket off road free flowing exhaust are required.

Proven Cheetah Technology:

• Drop-In Replacement
• Lower EGT's
• 2.5 Inch Work Stock Legal
• Stock Like Spooling
• Fleece Performance Exclusive FMW Compressor Wheel Technology
• Max Rear Wheel HP Rating: 650HP
• 40-45 PSI Operating Range

Features:

• Engine Manufacturer: Powerstroke
• Engine Year: 2015-2018
• Liter: 6.7 Liter
• Sold As: Each

Amplify your driving experience with a Fleece Performance Cheetah Turbocharger. Featuring a Fleece Performance exclusive 63mm FMW compressor wheel and a high flow turbine wheel; this turbo is capable of supporting 650HP, without sacrificing any drivability.

Enjoy lower EGT's, smooth and quick throttle response, big top end power. Whether it's towing, racing, sled pulling, or just driving to work the Cheetah will get the job done. Aftermarket off road tuning and aftermarket off road free flowing exhaust are required.

Proven Cheetah Technology:

• Drop-In Replacement
• Lower EGT's
• 2.5 Inch Work Stock Legal
• Stock Like Spooling
• Fleece Performance Exclusive FMW Compressor Wheel Technology
• Max Rear Wheel HP Rating: 650HP
• 40-45 PSI Operating Range

Note: A 2015-2018 Powerstroke Turbocharger core must be returned in order to obtain your core refund.

Features:

• 2011-2016 63mm FWM 6.7 (Cab and Chassis)Powerstroke Cheetah Turbo
• Engine Manufacturer: Powerstroke
• Engine Year: 2017-2018
• Liter: 6.7 Liter
• Sold As: Each

63mm Billet LB7 Cheetah Turbocharger. Wake up your 2001-2004 LB7 with the drop in replacement Fleece Performance LB7 Cheetah Turbocharger. Featuring a Fleece Performance custom 63mm billet compressor wheel and high flow Inconel turbine wheel, this turbo can power your truck all the way up to 625 RWHP.

Features:

• 100 Percent Drop in Replacement
• Stock Like Spool-up
• Lower EGTs
• Ships with Installation kit to include a remote oil feed line to extend the life of the #4 cam journal bearing
• 60-85 rwhp gain on an otherwise maxed out EFIlive Tune
• Includes a stock appearing machined mouth piece for maximum flow
• 60-day workmanship warranty

Kit Includes:

• 63mm LB7 Cheetah Turbocharger
• LB7 High Flow Intake Horn
• -6 AN Oil Feed Line
• 90Degree Turbo Oil Feed Fitting
• Engine Block Oil Feed Fitting
• Turbo Drain Flange – Upper
• Turbo Drain Flange – Lower
• (2) 3/8 Inch Turbo Drain Bolts
• (2) Turbo Drain Extension Clamps
• Turbo to Drain Gasket
• Drain to Block Gasket
• Stock Oil Feed Plug
• Turbo Thermostat Coolant Plug
• (2) Turbo Coolant Return Plug with Clamp

Core Items: Stock LB7 Turbo

Trucks with California Emissions systems will need modification in order for this turbocharger to fit properly.

S463/83 Turbocharger. Bigger is not always better! Whether you want to get rid of your problem plagued VGT or VNT turbo, on your 6.7 Cummins or Duramax, or you’re just after that classic diesel sound the S463 is a great place to start for any sub 700 RWHP application.

With a smaller compressor and turbine package, matched with the .90 turbine housing, our S463 offers great spool up and driving characteristics, without sacrificing reliability. The robust S400 chassis has all the big features it needs for long term reliable power delivery.

This is Fleece Performance's go to turbo for any 5.9 Common Rail Cummins, 6.7 Common Rail Cummins, or Duramax truck with mild fueling upgrades that still needs to work for a living. Well rounded for day to day commuter driving, and better suited for heavier towing applications than some of the larger alternatives.

Turbine housing is T4 .90 A/R Divided which comes with the standard Flat V S400 outlet flange or can be machined to an HX40.

S467/83 Turbocharger. This S467 from Fleece Performance is not your standard out-of-the box S467.7 from Borg Warner. Different in nearly every way than the common 67.7FMW, the Fleece Performance Cast S467 offers superb driving characteristics with enough air for more than 800 RHWP.

Best suited for non-working, daily driver/weekend warrior, type applications, the cast S467 offers little compromise in overall driving characteristics when complimented with proper fueling modifications. With its growing reputation for smooth and responsive power, it's sure to put a smile on your face when you let this turbo loose.

A standard compressor cover is used to better accommodate a swap using the common 5 inch hose inlet and v-band compressor outlet.

Fleece Performance thoroughly tests, driving each and every turbo combination that is offered on multiple platforms. The main goal is always the best in performance across the entire power curve, rather than just a big peak number.